LOCK WITH LCD
Electronic code lock with the ability
to rewrite the entry code. Can be used for entrance door, car door or
a locker. The LCD simplify the interaction by the user. Any 4 digits number can be used. Pressing the right code activates the relay for 2 seconds. Not pressing any key for more than 30 seconds resets the display. Using microcontroller PIC16F870. To change the 4 digits code press
'New Code' pushbutton. The pushbutton has to be mounted in an
area not accessible to the public.
The 4 digits are stored in the chip's EEPROM, so the numbers are retained when the power is off.
You are free to use the circuit diagram and the software with no
See also Technical Tips
Supply 12 to 24V for the relay, 5V for the PIC is from 78L05 voltage regulator.
The NO contact of the relay is connected to the door electric latch.
Key pad can be any matrix switches.
All transistors are BC237 or equivalent.
LCD module is 1 line 16 characters. It has 14 way connector, 10 connections are used, 4 bits data bus is selected. There is a big selection of LCD modules, and they are very similar in characteristics i.e. DM1601, ACM1601.
Contrast pot must be set because in one end of the pot it is totally dimmed.
New Code pushbutton is for entering new 4 digits code.